Finishing Touch

QR Code Installation

  1. Print the following QR codes found from your forked repo at ../img/QRcodes/qrcode.png.

    qrcode

  2. Separate and trim the QR codes. Using a piece of celophane tape to adhere each at the following location. Place the SSID QR code (A) on the digit 3 backplate between segments D and C. Place the URL QR code to the admin.html settings web page (B) on the digit 0 backplate also between segements D and C.

    qrcodelocation

  3. Turn the On/Off switch to the Off position.

  4. Plug the 12v power supply into the barrel jack then follow the user's guide to configure the kinetic display settings.